What is Chain Pitch?
Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. OREGON® chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.See the chain-pitch-and-gauge chart below.
What is Chain Gauge?
Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. OREGON® has several gauges for chainsaws - such as, .043”, .050", .058” and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge. See the chain-pitch-and-gauge chart below.
| Chain Pitch and Gauge Chart |
Oregon® part number
(stamped on Drive-link) |
Chain Pitch |
Chain Gauge |
|
11 |
3/4” |
.122” |
|
16 |
.404" |
.063" |
|
18 |
.404" |
.080" |
|
20 |
.325" |
.050" |
|
22 |
.325" |
.063" |
|
25 |
1/4" |
.050" |
|
27 |
.404" |
.063" |
|
33 |
.325" |
.050" |
|
34 |
.325" |
.058" |
|
35 |
.325" |
.063" |
|
50 |
.404" |
.050" |
|
51 |
.404" |
.058" |
|
52 |
.404" |
.063" |
|
58 |
.404" |
.058" |
|
59 |
.404" |
.063" |
|
72 |
3/8" |
.050" |
|
73 |
3/8" |
.058" |
|
75 |
3/8" |
.063" |
|
90 |
3/8" |
.043" |
|
91 |
3/8" |
.050" |
|
95 |
.325" |
.050" |
How do I measure the length of my chain?
The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon® may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon® chain in an Oregon® box, the drive link count is stamped on the flap; you can save that flap for future reference.
